Good
flexFUEL™ lite 120 ST
All purpose tank truck drop hose
flexFUEL™ lite 120 ST is the lighter conventional-fuel transfer option for identified compatible products, including gravity-drop service. Its published working-pressure rating is 65 psi.
The simplest way to select a hose.
- Abrasive Material Handling
- Abrasive Material Transfer
- Ag Chemical
- Ag General Use
- Air Seeder
- Animal Feed Transfer
- Auger Downspout
- Bilge
- Cable Guard
- Catch Basin and Sewer Cleaning
- Cement Conveying
- Cement Unloading
- Cesspool Cleaning
- Chemical Fume Extraction
- CNC Router Dust Collection
- Coal Dust
- Concrete Surfacing Dust
- Confined Space Ventilation
- Construction Ventilation
- Cotton Conveying
- Dairy Product Transfer
- Dewatering
- Directional Drilling Mud Transfer
- Dredging and Sand Discharge
- Dry Bulk Trailer Unloading
- Dry Fertilizer Transfer
- Dry Food Ingredient and Powder Transfer
- Duct Cleaning
- Fertilizer Sprayer
- Fish Transfer
- Flour Unloading
- Fly Ash
- Food and Beverage Transfer
- Food Processing
- Foundry Sand Transfer
- Fracking (Dewatering)
- Gasoline Vapor Recovery
- General Powder Transfer
- Grain Silo Unloading
- Grain Transfer
- Grain Unloading
- Grain Vac
- Grass Collection
- Gravel Removal
- Grease Trap Pumping
- Grit and Screenings Recovery
- Hydro Excavation Spoils Recovery
- Industrial Vacuum Cleanup
- Industrial Waste Recovery
- Insulation Blowing
- Insulation Removal
- Irrigation Water Transfer
- Landfill Gas Recovery (Methane)
- Leaf Collection
- Liquid Waste Collection and Transfer
- Manure Spreader
- Marine Water Suction and Discharge
- Metal Chip and Shavings Recovery
- Micro Tunneling
- Milk Transfer
- Mulch Blowing
- Oilfield Spill and Waste Recovery
- Paper Mill Waste Collection
- Paper Trim Collection
- Peat Moss Vacuum
- Pharmaceutical Liquid Ingredient Transfer
- Pharmaceutical Powder Conveying
- Plastic Pellet (Food Grade) Transfer
- Plastic Pellet Unloading
- Plastic Recycling Material Transfer
- Plastic Resin and Granule Transfer
- Plastic Resin Conveying
- Pneumatic Tanker Unloading
- Pool and Spa Water Circulation
- Portable Toilet Waste Collection
- Railcar Unloading
- Recycling Material Conveying
- Resin Unloading
- Roof Vacuuming
- Rural Firefighting
- Sand Blast Recovery
- Sand Suction
- Seed Transfer
- Septic Tank Pumping
- Shipyard Confined-Space Ventilation
- Silica Dust Collection
- Sludge and Liquid Waste Recovery
- Sludge and Septage Pumping
- Sludge Transfer
- Slurry Transfer
- Spill and Contaminated Liquid Recovery
- Straw Blowing
- Street Sweeper Debris Collection
- Surface Preparation Dust Collection
- Tank Truck Bulk Fuel Delivery
- Textile Fiber and Lint Collection
- Trash Pumping
- Treatment Plant Spill Recovery
- Wastewater Chemical Transfer
- Wastewater Suction and Discharge
- Welding Fume Extraction
- Wet and Dry Material Recovery
- Wine Transfer
- Wood Chip Collection and Conveying
- Wood Pellet Transfer
- Woodworking Dust and Sawdust Collection
Don’t see your application? Email us.
Application guide
Oilfield Spill and Waste Recovery
Best
flexFUEL™ HP 120 ST
High Pressure Petroleum Hose
flexFUEL™ HP 120 ST is the reinforced conventional-fuel option where greater working pressure is needed. Its published 150 psi rating applies in the listed 3- and 4-inch sizes.
Alternative
flexFUEL™ U 120 ST
All purpose polyurethane tank truck drop hose
Use for: Documented alternative fuels or extreme cold.
flexFUEL™ U 120 ST is the specialist for its documented alternative-fuel compatibility and extreme-cold range. Use it only for the fuels, concentrations and operating conditions covered by its specifications.
Notes: The main progression applies only to identified compatible conventional fuels. Documented alternative fuels and extreme cold use the specialist listed under Products; unidentified oilfield waste is not covered.
Warning: Identify the recovered material before selection, including hydrocarbons, fuel blend, aromatic content, treatment chemicals, hydrogen sulfide, solids and temperature. A fuel hose does not qualify unidentified waste. Verify pressure, vacuum, static and hazardous-environment requirements, and correctly terminate, bond, ground and test the complete recovery assembly.
Loading form...