Good
flexFOOD™ lite 200
Food grade suction and discharge hose
flexFOOD™ lite 200 is the lighter food-contact PVC option. Its clear wall and smooth bore support visual inspection and product flow in qualified, lower-duty transfer.
The simplest way to select a hose.
- Abrasive Material Handling
- Abrasive Material Transfer
- Ag Chemical
- Ag General Use
- Air Seeder
- Animal Feed Transfer
- Auger Downspout
- Bilge
- Cable Guard
- Catch Basin and Sewer Cleaning
- Cement Conveying
- Cement Unloading
- Cesspool Cleaning
- Chemical Fume Extraction
- CNC Router Dust Collection
- Coal Dust
- Concrete Surfacing Dust
- Confined Space Ventilation
- Construction Ventilation
- Cotton Conveying
- Dairy Product Transfer
- Dewatering
- Directional Drilling Mud Transfer
- Dredging and Sand Discharge
- Dry Bulk Trailer Unloading
- Dry Fertilizer Transfer
- Dry Food Ingredient and Powder Transfer
- Duct Cleaning
- Fertilizer Sprayer
- Fish Transfer
- Flour Unloading
- Fly Ash
- Food and Beverage Transfer
- Food Processing
- Foundry Sand Transfer
- Fracking (Dewatering)
- Gasoline Vapor Recovery
- General Powder Transfer
- Grain Silo Unloading
- Grain Transfer
- Grain Unloading
- Grain Vac
- Grass Collection
- Gravel Removal
- Grease Trap Pumping
- Grit and Screenings Recovery
- Hydro Excavation Spoils Recovery
- Industrial Vacuum Cleanup
- Industrial Waste Recovery
- Insulation Blowing
- Insulation Removal
- Irrigation Water Transfer
- Landfill Gas Recovery (Methane)
- Leaf Collection
- Liquid Waste Collection and Transfer
- Manure Spreader
- Marine Water Suction and Discharge
- Metal Chip and Shavings Recovery
- Micro Tunneling
- Milk Transfer
- Mulch Blowing
- Oilfield Spill and Waste Recovery
- Paper Mill Waste Collection
- Paper Trim Collection
- Peat Moss Vacuum
- Pharmaceutical Liquid Ingredient Transfer
- Pharmaceutical Powder Conveying
- Plastic Pellet (Food Grade) Transfer
- Plastic Pellet Unloading
- Plastic Recycling Material Transfer
- Plastic Resin and Granule Transfer
- Plastic Resin Conveying
- Pneumatic Tanker Unloading
- Pool and Spa Water Circulation
- Portable Toilet Waste Collection
- Railcar Unloading
- Recycling Material Conveying
- Resin Unloading
- Roof Vacuuming
- Rural Firefighting
- Sand Blast Recovery
- Sand Suction
- Seed Transfer
- Septic Tank Pumping
- Shipyard Confined-Space Ventilation
- Silica Dust Collection
- Sludge and Liquid Waste Recovery
- Sludge and Septage Pumping
- Sludge Transfer
- Slurry Transfer
- Spill and Contaminated Liquid Recovery
- Straw Blowing
- Street Sweeper Debris Collection
- Surface Preparation Dust Collection
- Tank Truck Bulk Fuel Delivery
- Textile Fiber and Lint Collection
- Trash Pumping
- Treatment Plant Spill Recovery
- Wastewater Chemical Transfer
- Wastewater Suction and Discharge
- Welding Fume Extraction
- Wet and Dry Material Recovery
- Wine Transfer
- Wood Chip Collection and Conveying
- Wood Pellet Transfer
- Woodworking Dust and Sawdust Collection
Don’t see your application? Email us.
Application guide
Pharmaceutical Liquid Ingredient Transfer
Better
flexFOOD™ 210
Heavy-duty food grade suction and discharge hose
flexFOOD™ 210 is the heavier food-contact PVC option. It adds working-pressure capability over the lite 200 while retaining clear construction and a smooth bore.
Best
flexFORCE™ Food Grade
Heavy-duty reinforced food and wine hose
flexFORCE™ Food Grade adds synthetic reinforcement for higher-rated, compatible food and beverage liquid transfer. Its pressure capability is evaluated at the actual hose diameter.
Notes: This progression is limited to liquid ingredients and complete assemblies qualified for the specific pharmaceutical process.
Validate the ingredient, concentration, temperature, cleaning or sterilization cycle, fittings and seals. Food-contact compliance alone is not pharmaceutical-process qualification.
Warning: Food-contact or FDA material statements alone do not qualify pharmaceutical service. Validate the ingredient, concentration, temperature, pressure, cleaning, sanitization or sterilization cycle, fittings and complete assembly. Product-contact surfaces must not adversely react with, add to or absorb drug material, and the process must satisfy contamination-control and validation requirements.
Loading form...