flexDUCT™ 625 (620WDWS)
General ducting and blower hose
A versatile solution with a wear strip for light dragging. Combining abrasion resistance with flexibility, it’s ideal for duct cleaning and as a blower hose for lightweight abrasives like wood chips and mulch. Constructed with EPDM rubber, a metal wire helix, a smooth bore, and a slightly corrugated outer diameter.
FEATURES
APPLICATION
CONSTRUCTION
TEMPERATURE RANGE
AVAILABLE SIZES
Inside Diameter
Minimum Bend Radius
Working Pressure
Vacuum Rating
Weight
Standard Length
in / mm
72°F (22°C)
in / mm
72°F (22°C)
PSI / bar
72°F (22°C)
inHg / kPa
lb/ft / kg/m
ft / m
2-1/2 / 63.5
3.0 / 76
12 / 0.83
9.0 / 30.5
0.48 / 0.71
50 / 15.2
3 / 76.2
3.0 / 76
12 / 0.83
8.0 / 27.1
0.61 / 0.91
50 / 15.2
4 / 101.6
4.0 / 102
9 / 0.62
6.0 / 20.3
0.85 / 1.26
50 / 15.2
5 / 127.0
5.0 / 127
7 / 0.48
5.0 / 16.9
0.90 / 1.34
50 / 15.2
6 / 152.4
6.0 / 152
6 / 0.41
4.0 / 13.5
1.17 / 1.74
50 / 15.2
7 / 177.8
7.0 / 178
5 / 0.34
4.0 / 13.5
1.27 / 1.89
50 / 15.2
8 / 203.2
8.0 / 203
4 / 0.28
4.0 / 13.5
1.50 / 2.23
50 / 15.2
10 / 254.0
10.0 / 254
3 / 0.21
4.0 / 13.5
2.67 / 3.97
50 / 15.2
12 / 304.8
12.0 / 305
3 / 0.21
4.0 / 13.5
2.80 / 4.17
25 / 7.6
*Over flexing or repeated flexing of hose within 18″ (457 mm) of fitting is a common cause of hose failure. Installing a 12″-14″ (305-356 mm) section of our Banding Coil at the end of the hose should be considered. Kanaflex will not be responsible for damage to hose due to over flexing.
Got questions?
CONTACT USCONTACT USCONTACT US